No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S2 V800R010C10SPC500 Configuration Guide - System Management 01

This is NE20E-S2 V800R010C10SPC500 Configuration Guide - System Management
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deleting LAD Neighbor Information

Deleting LAD Neighbor Information

You can run the clear command to delete Link Automatic Discovery (LAD) neighbor information.

Context

LAD neighbor information cannot be restored after it is deleted. Exercise caution when running the clear link neighbor command.

Procedure

  1. Run the clear link neighbor [ interface interface-type interface-number | slot slot-id ] { sub-interface | all }} command in the user view to delete LAD neighbor information.
Translation
Download
Updated: 2019-01-02

Document ID: EDOC1100055400

Views: 19995

Downloads: 30

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next