No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S2 V800R010C10SPC500 Configuration Guide - System Management 01

This is NE20E-S2 V800R010C10SPC500 Configuration Guide - System Management
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting a Rate for Subcard Ports

Setting a Rate for Subcard Ports

You can set a rate for subcard ports so that the subcard works at a desired rate.

Context

A CR2DP2C1HF11 has two ports and works at 2 x 155 Mbit/s or 1 x 622 Mbit/s. To allow the CR2DP2C1HF11 to work at a desired rate, set a rate for the ports on the subcard.

This configuration task is supported only on the Admin-VS.

Procedure

  1. Run set service-mode port-rate {155 | 622 } slot slot-id

    A rate is configured for the ports on a CR2DP2C1HF11.

    By default, the rate is 155 Mbit/s for the ports on a CR2DP2C1HF11.

    • After a port rate changes from 155 Mbit/s to 622 Mbit/s, the second port on the CR2DP2C1HF11 is unavailable, and the configurations on the ports are lost.
    • After you run the set service-mode port-rate command, the CR2DP2C1HF11 automatically powers off and then on and works at the configured rate.

Example

Run the display service-mode port-rate command to check the rate at which the ports work on a CR2DP2C1HF11.

<HUAWEI> display service-mode port-rate slot 2 
Current port-rate of the device: 155MPos
Translation
Download
Updated: 2019-01-02

Document ID: EDOC1100055400

Views: 14641

Downloads: 26

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next