No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S2 V800R010C10SPC500 Configuration Guide - System Management 01

This is NE20E-S2 V800R010C10SPC500 Configuration Guide - System Management
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the NTP Master Clock

Configuring the NTP Master Clock

The master clock on the server must have a smaller stratum number (higher stratum) than that of the clock on the client. Otherwise, the clock on the client cannot synchronize with the master clock on the server. Perform the following steps on the server.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run ntp-service refclock-master [ ip-address ] [ stratum ]

    An NTP master clock is configured.

  3. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-02

Document ID: EDOC1100055400

Views: 19743

Downloads: 30

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next