No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S2 V800R010C10SPC500 Configuration Guide - System Management 01

This is NE20E-S2 V800R010C10SPC500 Configuration Guide - System Management
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Dynamically Installing Modules

Dynamically Installing Modules

This section describes how to load and unload modules without service outages.

Applicable Environment

If the in-use module does not exist in the system, the dynamic load function can be used to load desired module file to the system.

NOTE:

This configuration process is supported only on the Admin-VS.

Pre-configuration Tasks

Before dynamically installing modules, complete the following tasks:

  • The user has successfully logged in to the device.

Procedure

  1. Run the install-module file-name command to dynamically load the specified module file.

    NOTE:

    If the module is not required any more, use the uninstall-module command to unload the module file.

Checking the Configuration

  • Run the display module-information [ verbose ] command to view information about the dynamically loaded module.

<HUAWEI> display module-information verbose
                       Module Information
--------------------------------------------------------------------
Module Version        InstallTime              PackageName
--------------------------------------------------------------------
TLV     V800R010C10MOD503 2012-05-23 06:28:00      NE20EV800R010C10MOD503.MOD
--------------------------------------------------------------------
Total = 1
Board Info :
-------------------------------------------
Slot-id  ProcId  Type     FileName   Module
-------------------------------------------
17       3       SCRIPT   HM9000.mod TLV
17       3       SCRIPT   HM9001.mod TLV
17       3       SCRIPT   HM9002.mod TLV
18       6       SCRIPT   HM9000.mod TLV
18       6       SCRIPT   HM9001.mod TLV
18       6       SCRIPT   HM9002.mod TLV
-------------------------------------------
Total = 6
Translation
Download
Updated: 2019-01-02

Document ID: EDOC1100055400

Views: 19881

Downloads: 30

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next