No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S2 V800R010C10SPC500 Configuration Guide - System Management 01

This is NE20E-S2 V800R010C10SPC500 Configuration Guide - System Management
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Time Interval to Update Client Clockand Maximum NTP Synchronization Distance Threshold

Configuring the Time Interval to Update Client Clockand Maximum NTP Synchronization Distance Threshold

If the server clock changes or multiple NTP servers are available, the client clock, updated at a specified interval, must keep synchronization with the server that is located within the maximum synchronization distance threshold.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run ntp-service sync-interval interval

    The time interval to update the client clock is configured.

    The value ranges from 180 to 600, in seconds.

  3. Run the ntp-service max-distance max-distance-value command to configure the maximum NTP synchronization distance threshold.
  4. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-02

Document ID: EDOC1100055400

Views: 19790

Downloads: 30

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next