No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S2 V800R010C10SPC500 Feature Description - Basic Configurations 01

This is NE20E-S2 V800R010C10SPC500 Feature Description - Basic Configurations
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Intermediate File in the INI Format

Intermediate File in the INI Format

ZTP supports INI intermediate files that store device and version file information.

An INI intermediate file must be suffixed with .ini. The file format is as follows:

;BEGIN ROUTER
[GLOBAL CONFIG]
FILESERVER=ftp://ftpuser:Pwd123456@10.1.3.2

[DEVICEn DESCRIPTION]
ESN=2102351931P0C3000154
MAC=e468-a356-0cb0
SYSTEM-SOFTWARE=V800R010C10B140_0424_new.cc
SYSTEM-CONFIG=vrpcfg.cfg
SYSTEM-PAT=NE20EV800R010C10.PAT
;END ROUTER
Table 8-1 Fields in an INI intermediate file

Field

Mandatory or Optional

Description

;BEGIN ROUTER

Mandatory

It is the start flag of the file and cannot be modified.

[GLOBAL CONFIG]

Mandatory

It is the start flag of the global configuration and cannot be modified.

FILESERVER

Mandatory

It is the address of a version file server. Version files can be transferred through TFTP, FTP, or SFTP. The format of this field varies according to the protocol used for file transfer.
  • tftp://hostname/path

  • ftp://[username[:password]@]hostname[:port]/path

  • sftp://[username[:password]@]hostname[:port]/path

username, password, and port are optional. path specifies the directory where version files are stored on a file server.

[DEVICEn DESCRIPTION]

Mandatory

It is the start flag of the file description. n specifies a device number, with the value being an integer starting from 0.

ESN

Optional

It specifies the equipment serial number (ESN) of a device. If this field is set to DEFAULT, the ESN of the device is not checked. If this field is set to another value, the ESN of the device must be the same as the configured value.

The default value of this field is DEFAULT. If this field does not exist or is empty, the default value is used.

MAC

Optional

It specifies the MAC address of a device, in the XXXX-XXXX-XXXX format, where X is a hexadecimal number. If this field is set to DEFAULT, the device MAC address is not checked. If this field is set to another value, the device MAC address must be the same as the configured value.

The device ESN is checked before the MAC address.

The default value of this field is DEFAULT. If this field does not exist or is empty, the default value is used.

SYSTEM-SOFTWARE

Optional

It specifies a system software file name, with the extension .cc.

SYSTEM-CONFIG

Optional

It specifies a configuration file name, with the extension .cfg, .zip, or .dat.

SYSTEM-PAT

Optional

It specifies a patch file name, with the extension .pat.

;END ROUTER

Mandatory

It is the end flag of the file and cannot be modified.

Translation
Download
Updated: 2019-01-02

Document ID: EDOC1100055465

Views: 3304

Downloads: 2

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next