No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S2 V800R010C10SPC500 Feature Description - MPLS 01

This is NE20E-S2 V800R010C10SPC500 Feature Description - MPLS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
BFD for P2MP TE

BFD for P2MP TE

BFD for P2MP TE applies to NG-MVPN and VPLS scenarios and rapidly detects P2MP TE tunnel failures. This function helps reduce the response time, improve network-wide reliability, and reduces traffic loss.

Benefits

No tunnel protection is provided in the NG-MVPN over P2MP TE function or VPLS over P2MP TE function. If a tunnel fails, traffic can only be switched using route change-induced hard convergence, which renders low performance. This function provides dual-root 1+1 protection for the NG-MVPN over P2MP TE function and VPLS over P2MP TE function. If a P2MP TE tunnel fails, BFD for P2MP TE rapidly detects the fault and switches traffic, which improves fault convergence performance and reduces traffic loss.

Principles

Figure 4-35 BFD for P2MP TE principles

In Figure 4-35, BFD is enabled on the root PE1 and the backup root PE2. Leaf nodes UPE1 to UEP4 are enabled to passively create BFD sessions. Both PE1 and PE2 sends BFD packets to all leaf nodes along P2MP TE tunnels. The leaf nodes receives the BFD packets transmitted only on the primary tunnel. If a leaf node receives detection packets within a specified interval, the link between the root node and leaf node is working properly. If a leaf node fails to receive BFD packets within a specified interval, the link between the root node and leaf node fails. The leaf node then rapidly switches traffic to a protection tunnel, which reduces traffic loss.

Translation
Download
Updated: 2019-01-02

Document ID: EDOC1100055471

Views: 7371

Downloads: 6

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next