Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Terminology for MPLS-TP OAM
Terms
None
Abbreviations
Abbreviation |
Full Name |
|---|---|
AIS |
Alarm Indication Signal |
CC |
Continuity Check |
CSF |
Client Signal Failure |
CV |
Connectivity Verification |
DM |
Delay Measurement |
LB |
Loopback |
LCK |
Locked Signal |
LM |
Loss Measurement |
LSP |
Label Switched Path |
LSR |
Label Switching Router |
LT |
Linktrace |
MEP |
Maintenance association End Point |
MIP |
Maintenance association Intermediate Point |
MPLS-TP |
Multiprotocol Label Switching Transport Profile |
OAM |
Operation Administration & Maintenance |
PE |
Provider Edge Router |
PW |
Pseudo-Wires |
RDI |
Remote Defect Indication |
SPE |
Superstratum PE |
TST |
Test |
UPE |
Underlayer PE |
