No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S2 V800R010C10SPC500 Feature Description - Network Reliability 01

This is NE20E-S2 V800R010C10SPC500 Feature Description - Network Reliability
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application of MPLS OAM in the IP RAN Layer 2 to Edge Scenario

Application of MPLS OAM in the IP RAN Layer 2 to Edge Scenario

MPLS OAM is deployed on PEs to maintain and operate MPLS networks. Working at the MPLS client and server layers, MPLS OAM can effectively detect, identify, and locate client layer faults and quickly switch traffic if links or nodes become faulty, reducing network maintenance cost.

Figure 3-4 IP RAN over MPLS in the Layer 2 to edge scenario

Figure 3-4 illustrates an IP RAN in the Layer 2 to edge scenario. The MPLS OAM implementation is as follows:

  • The BTS, NodeB, BSC, and RNC can be directly connected to an MPLS network.
  • A TE tunnel between PE1 and PE4 is established. PWs are established over the TE tunnel to transmit various services.
  • MPLS OAM is enabled on PE1 and PE4 OAM parameters are configured on PE1 and PE4 on both ends of a PW. These PEs are enabled to send and receive OAM detection packets, which allows OAM to monitor the PW between PE1 and PE4. OAM can obtain basic PW information. If OAM detects a default, PE4 sends a BDI packet to PE1 over a reverse tunnel. PEs notify the user-side BTS, NodeB, RNC, and BSC of fault information so that the user-side devices can use the information to maintain networks.

The working principles of PE2 and PE3 are the same as those of PE 1.

Translation
Download
Updated: 2019-01-02

Document ID: EDOC1100055473

Views: 11861

Downloads: 4

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next