No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE20E-S2 V800R010C10SPC500 Feature Description - Network Reliability 01

This is NE20E-S2 V800R010C10SPC500 Feature Description - Network Reliability

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


Link detection protocols are used to monitor the connectivity of links between devices and detect faults. A single fault detection protocol cannot detect all faults in all links on a complex network. A combination of protocols and techniques must be used to detect link faults.

Ethernet OAM detects faults in Ethernet links and advertises fault information to interfaces or other protocol modules. Ethernet OAM fault advertisement is implemented by an OAM manager (OAMMGR) module, application modules, and detection modules. An OAMMGR module associates one module with another. A detection module monitors link status and network performance. If a detection module detects a fault, it instructs the OAMMGR module to notify an application module or another detection module of the fault. After receiving the notification, the application or detection module takes measures to prevent a communication interruption or service quality deterioration.

The OAMMGR module helps an Ethernet OAM module to advertise fault information to a detection or application module. If an Ethernet OAM module detects a fault, it instructs the OAMMGR module to send alarms to the network management system (NMS). A network administrator takes measures based on information displayed on the NMS. Ethernet OAM fault advertisement includes fault information advertisement between CFM and other modules.

Updated: 2019-01-02

Document ID: EDOC1100055473

Views: 15347

Downloads: 4

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next