No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S2 V800R010C10SPC500 Feature Description - Network Reliability 01

This is NE20E-S2 V800R010C10SPC500 Feature Description - Network Reliability
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
BFD for IS-IS

BFD for IS-IS

In most cases, the interval at which Hello packets are sent is 10s, and the IS-IS neighbor holding time (the timeout period of a neighbor relationship) is three times the interval. If a device does not receive a Hello packet from its neighbor within the holding time, the device terminates the neighbor relationship.

A device can detect neighbor faults at the second level only. As a result, link faults on a high-speed network may cause a large number of packets to be discarded.

BFD, which can be used to detect link faults on lightly loaded networks at the millisecond level, is introduced to resolve the preceding issue. With BFD, two systems periodically send BFD packets to each other. If a system does not receive BFD packets from the other end within a specified period, the system considers the bidirectional link between them Down.

BFD is classified into the following modes:
  • Static BFD

    In static BFD mode, BFD session parameters (including local and remote discriminators) are set using commands, and requests must be delivered manually to establish BFD sessions.

  • Dynamic BFD

    In dynamic BFD mode, the establishment of BFD sessions is triggered by routing protocols.

BFD for IS-IS enables BFD sessions to be dynamically established. After detecting a fault, BFD notifies IS-IS of the fault. IS-IS sets the neighbor status to Down, quickly updates link state protocol data units (LSPs), and performs the partial route calculation (PRC). BFD for IS-IS implements fast IS-IS route convergence.
NOTE:

Instead of replacing the Hello mechanism of IS-IS, BFD works with IS-IS to rapidly detect the faults that occur on neighboring devices or links.

BFD Session Establishment and Deletion

  • Conditions for establishing a BFD session

    • Global BFD is enabled on each device, and BFD is enabled on a specified interface or process.

    • IS-IS is configured on each device and enabled on interfaces.

    • Neighbors are Up, and a designated intermediate system (DIS) has been elected on a broadcast network.

  • Process of establishing a BFD session

    • P2P network

      After the conditions for establishing BFD sessions are met, IS-IS instructs the BFD module to establish a BFD session and negotiate BFD parameters between neighbors.

    • Broadcast network

      After the conditions for establishing BFD sessions are met and the DIS is elected, IS-IS instructs BFD to establish a BFD session and negotiate BFD parameters between the DIS and each device. No BFD sessions are established between non-DISs.

    On broadcast networks, devices (including non-DIS devices) of the same level on a network segment can establish adjacencies. In BFD for IS-IS, however, BFD sessions are established only between the DIS and non-DISs. On P2P networks, BFD sessions are directly established between neighbors.

    If a Level-1-2 neighbor relationship is set up between the devices on both ends of a link, the following situations occur:
    • On a broadcast network, IS-IS sets up a Level-1 BFD session and a Level-2 BFD session.
    • On a P2P network, IS-IS sets up only one BFD session.
  • Process of tearing down a BFD session

    • P2P network

      If the neighbor relationship established between P2P IS-IS interfaces is not Up, IS-IS tears down the BFD session.

    • Broadcast network

      If the neighbor relationship established between broadcast IS-IS interfaces is not Up or the DIS is reelected on the broadcast network, IS-IS tears down the BFD session.

    If the configurations of dynamic BFD sessions are deleted or BFD for IS-IS is disabled from an interface, all Up BFD sessions established between the interface and its neighbors are deleted. If the interface is a DIS and the DIS is Up, all BFD sessions established between the interface and its neighbors are deleted.

    If BFD is disabled from an IS-IS process, BFD sessions are deleted from the process.

    NOTE:

    BFD detects only the one-hop link between IS-IS neighbors because IS-IS establishes only one-hop neighbor relationships.

  • Response to the Down event of a BFD session

    When BFD detects a link failure, it generates a Down event and informs IS-IS of the Down event through the GFD module. IS-IS then suppresses neighbor relationships and recalculates routes. This process speeds up network convergence.

Usage Scenario

Dynamic BFD needs to be configured based on the actual network. If the time parameters are not configured correctly, network flapping may occur.

BFD for IS-IS speeds up route convergence through rapid link failure detection. The following is a networking example for BFD for IS-IS.

Figure 2-13 BFD for IS-IS

The configuration requirements are as follows:

  • Basic IS-IS functions are configured on each device shown in Figure 2-13.

  • Global BFD is enabled.

  • BFD for IS-IS is enabled on Device A and Device B.

If the link between Device A and Device B fails, BFD can rapidly detect the fault and report it to IS-IS. IS-IS sets the neighbor status to Down to trigger an IS-IS topology calculation. IS-IS also updates LSPs so that Device C can promptly receive the updated LSPs from Device B, which accelerates network topology convergence.

Translation
Download
Updated: 2019-01-02

Document ID: EDOC1100055473

Views: 13508

Downloads: 4

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next