No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Reference

TE30, TE40, TE50, TE60, TX50, RP100, and RP200 V600R019C00

This document describes the parameters in the configuration file.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Purpose

This document describes how to config the HUAWEI TE30/TE40/TE50/TE60/TX50/RP100/RP200.

Intended Audience

This document is primarily intended for:

  • Technical support engineers
  • Huawei resellers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Issue

Date

Description

05

2019-05-30

This issue is the fifth official release.

  • Added the PolycomSwitch configuration item in 2.2 Conference Parameters (Conf).
  • Added the Restrict264AusFmt configuration item in 2.2 Conference Parameters (Conf).
  • Added the H263AuxFmtPromote configuration item in 2.2 Conference Parameters (Conf).
  • Added the H263CifSwitch configuration item in 2.2 Conference Parameters (Conf).
  • Add the SrvService configuration item in 2.3 Call Parameters (Call).
  • Add the SrvProtocol configuration item in 2.3 Call Parameters (Call).

Add the VoHdmiPictureMode configuration item in 2.13 Video Output Parameters (VideoOut).

04

2019-04-09

This issue is the fourth official release.

Modified 1 Overview.

03

2019-02-28

This issue is the third official release.

  • Added section 2.30 "Cloud Platform Parameters (CloudPlatParam)."
  • Added section 2.31 "Huawei Cloud Platform Parameters (HwCloud)."
  • Added RtpHdrExtId to section 2.2 "Conference Parameters (Conf)."
  • Added EnableReportChanDataLost to section 2.15 "Preferred Parameters (Prefer)."
  • Deleted H263CifSwitch from section 2.2 "Conference Parameters (Conf)."

02

2018-12-07

This issue is the second official release.

01

2018-09-30

This issue is the first official release.

Translation
Download
Updated: 2019-05-31

Document ID: EDOC1100057236

Views: 4206

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next