No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


MIB Reference

TE30, TE40, TE50, TE60, TX50, RP100, and RP200 V600R019C00


Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


Figure 1-2 shows the PDUs (SNMP packets) exchanged between the NMS and an agent.

Figure 1-2 SNMP packets exchange

The SNMP packets are described as follows:

  • get-request: The NMS reads one or more parameter values from the agent.
  • get-next-request: The NMS reads the next parameter value (the one following the current parameter value) from the agent.
  • set-request: The NMS sets one or more parameter values for the agent.
  • get-response: The agent returns one or more parameter values to respond to the preceding three requests.
  • trap: This packet is proactively sent by the agent to the NMS to notify the NMS of certain events.

The first three operations are initiated from the NMS to the agent, whereas the last two operations are initiated from the agent to the NMS.

Updated: 2019-05-31

Document ID: EDOC1100057237

Views: 10918

Downloads: 15

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next