Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting a Camera Preset
Camera presets are camera positions you set and save ahead of time. A camera preset stores the pan, tilt, and zoom settings of the camera. You can easily control the camera by switching between camera presets. You can configure remote camera presets during conferences.
Prerequisites
You are familiar with how to control a camera. For details, see Controlling a Camera.
Background
Table 6-2 lists the camera preset details.
Saving a Camera Preset
- Choose and click the Video Control tab.
On the displayed Video Control page, the camera control area is on the right side.
- Adjust the camera pan, tilt, and zoom settings until the desired video is displayed on the monitor. Refer to Controlling a Camera.
- Click the Save Preset tab, as shown in Figure 6-1.
- Select a number and click Confirm.
: indicates that the number has not been set for a preset. After you select this number and confirm the selection, the number is used for the current preset.
: indicates that the number has been set for a preset. After you select this number and confirm the selection, the current preset will overwrite the original preset.
: indicates that the number has not been set for a preset.
After you select this number and confirm the selection, the number
is used for the current preset.
: indicates that the number has been set for a preset. After
you select this number and confirm the selection, the current preset
will overwrite the original preset.Switching Between Camera Presets
- On the Video Control page, click Switch Preset.
- Under Switch Preset, select a number corresponding to a preset, and click Confirm.
Removing a Camera Preset
- On the Video Control page, click Save Preset tab.
- Under Save Preset, select the number corresponding to the preset you want to remove, and click Clear.