Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Whitelist
After you configure a whitelist, only devices with the IP addresses specified in the whitelist can connect to the endpoint. If the whitelist is empty, all IP addresses are allowed to connect to the endpoint. The whitelist helps enhance videoconferencing security.
Background
Set the whitelist under the guidance
of technical support engineers.
- PC that is used to access the endpoint web interface
- Videoconferencing MCU
- SMC2.0
- Recording server
- Touch panel
Procedure
- Choose .
- Select Enable.
If Enable is deselected, the whitelist is invalid. That is, all IP addresses are allowed to connect to the endpoint. You can modify the whitelist only after selecting Enable here.
- Click Add and set IP address and Mask length.
- Click OK. The settings
take effect immediately.
To delete a record from the whitelist, select the record and click Delete.