Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Controlling a Camera
You can perform pan, tilt, and zoom (PTZ) control over a local or remote camera.
Prerequisites
You are familiar with the following buttons for camera control:
: Turns the camera upward, downward, leftward, and rightward.
: Turns the camera forward.
: Enlarges the image taken by a camera.
: Zooms in on a scene.
: Shrinks the image taken by a camera.
: Zooms out on a scene.
: Automatically adjusts the camera focus.
: Turns the camera upward, downward, leftward, and rightward.
: Turns the camera forward.
: Enlarges the image taken by a camera.
: Zooms in on a scene.
: Shrinks the image taken by a camera.
: Zooms out on a scene.
: Automatically adjusts the camera focus. Procedure
- Choose .
- In the upper right corner of the Video Control page, select the camera you want to control, as shown in Figure 6-2.
- When your endpoint is not in a conference, you can select only Local camera.
- When your endpoint is in a conference, you can select Local camera or Remote camera. By default, Local camera is selected.
When Monitor video is enabled, the video delivered from the camera under control is displayed in the upper left corner of the Video Control page. You can then view the camera output while you control the camera. - Click the controls shown in Figure 6-2 to control cameras.
When the desired video is displayed on the monitor, you can save the camera settings as a preset so you can easily switch to the preset in the future. For details about how to set a camera preset, see Setting a Camera Preset.