Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Recording a Conference
Your endpoint can record local and multipoint conferences.
Prerequisites
To ensure rights of participants, read the instructions and suggestions for using recoridng products in the latest HUAWEI RSE6500 Security Maintenance before using the products.
Table 4-8 Recording prerequisites
Conference Type |
Recording Prerequisites |
|---|---|
Local conference |
The recording server IP address or URL is set on the endpoint. |
Multipoint conference hosted by a Huawei standalone MCU (such as the HUAWEI VP9660 MCU) |
|
Multipoint conference hosted by a built-in MCU |
The recording server IP address or URL is set on the endpoint. |
Background
- During recording of local conferences, the endpoint cannot place or answer calls.
- During recording of local conferences, you can perform Start, Pause, Resume, and Stop operations. During recording of multipoint conferences, you can perform Start and Stop operations.
- When a Huawei standalone MCU is used to host a conference, you can enable or disable live broadcast and recording for the conference.
- When a built-in MCU is used to host a conference, you can enable or disable recording for the conference.
- During a multipoint conference, the chair site and the site where the built-in MCU is used can perform recording operations.
- To record a local conference, follow the following steps in this section. To record a multipoint conference, see Controlling a Conference.
Procedure
- Choose .
- Click .
The recording starts.
To stop recording, click .