Setting Broadsoft Parameters

Procedure

1. Choose System SettingsNetwork and click the Broadsoft tab.
2. Set the Broadsoft parameters listed in Table 3-32.
   Table 3-32  Broadsoft parameters

   Parameter	Description	Setting
   Broadsoft	Specifies whether to interconnect with the Broadsoft platform. After the interconnection, the endpoint can download and update configuration data from the configuration server on the Broadsoft platform. NOTE: If you set this parameter to Enable, you must also set URL, User name, and Password.	The default value is Disable.
   URL	Specifies the address of the configuration server on the Broadsoft platform.	This parameter does not have a default value. Obtain the URL from the Broadsoft server administrator.
   User name	Specifies the user name authenticated by the Broadsoft platform after receiving a session setup request from the endpoint. The user name set here must be the same as that set on the Broadsoft platform.	This parameter does not have a default value. Obtain the user name from the Broadsoft server administrator.
   Password	Specifies the password authenticated by the Broadsoft platform after receiving a session setup request from the endpoint. The password set here must be the same as that set on the Broadsoft platform.	This parameter does not have a default value. Obtain the password from the Broadsoft server administrator.

3. Click Save to make the settings take effect.