Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
System Status
System status information helps you maintain your endpoint.
Choose . On the System Status page that is displayed, you can check:
- Line status: includes the local IP address, alternate IP address, network interface mode, WLAN IP address, information about whether GK is enabled, H.323 site number, information about whether SIP is enabled, SIP site number, PSTN status, PSTN number of a remote site, running duration, camera status, and ACS connection status.
- Call status: includes the conference number (or the IP address, number, or name of the remote site), line rate, video resolution, video rate (frame rate), presentation resolution, presentation rate (frame rate), audio rate, video packet loss rate, presentation packet loss rate, audio packet loss rate, jitter, delay, LSD rate, HSD rate, MLP rate, HMLP rate, conference participating duration, and presentation token. The call status is displayed only when your endpoint is in a conference.
- Conference parameters: includes the call bandwidth, video protocol, video bandwidth (frame rate), audio protocol, audio bandwidth, presentation protocol, presentation bandwidth (frame rate), remote number, signaling encryption, media stream encryption, conference number for video access, conference number for audio access, and password for conference authentication. The conference parameters are displayed only when your endpoint is in a conference.
- Input port status: includes the video information of all video input ports, connection status information about the USB1 and USB2 ports, and air content sharing information.
- 4E1 connection status (only for the TE60).