Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting Audio and Video Protocols
Your endpoint supports multiple audio and video protocols. Select the protocols required for call purposes.
Background
Using the audio or video protocol that you select, your endpoint negotiates the audio or video capability with a remote endpoint to set up a call.
If you do not select any audio or video protocols on the Audio and video protocols tab, you cannot set audio or video protocols while you are Setting Advanced Conference Parameters.
Procedure
- Choose and click the Audio and video protocols tab.
- Select audio and video protocols.
- Select at least one audio protocol and one video protocol so that you can use your endpoint to place audio calls or video calls.
- Select RTV when your endpoint interoperates with a Lync device.
- Click Save.
The settings take effect immediately.
