Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting Up a PPPoE Dial-Up Connection
Correct IP parameter settings on your endpoint enable you to set up a PPPoE dial-up connection with a broadband network to communicate with other network devices.
Prerequisites
- Choose and set PPPoE to Enable.
- You have entered the user name and password that are provided by your broadband access service provider in User name and Password respectively.
- You have set Dialing mode to Manual.
If Dialing mode is set to Disable, the endpoint automatically sets up a PPPoE dial-up connection.
Procedure
- Choose .
The PPPoE Dialing page is displayed.
- Click Dial.
To cancel a PPPoE dial-up connection, set PPPoE to Disable.
Follow-up Procedure
When a PPPoE dial-up connection is set up, your endpoint has a new IP address. Use this IP address the next time you want to log in to the endpoint web interface.
To obtain your endpoint IP address, access the home screen of the user interface controlled by the remote control and choose .