Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Initiating a Conference from the Address Book Page
From the address book on your endpoint, you can select sites to initiate a conference.
Prerequisites
You can use Videoconferencing MCU or the built-in MCU to initiate a multipoint conference.
- Videoconferencing MCU: Your endpoint has registered with a GK server, and Multipoint call mode is set to Multipoint converge or OFF under .
- Built-in MCU: Multipoint call mode is set
to Built-in MCU or AUTO under .To provide the built-in MCU function, the endpoint requires a specific license. Contact Huawei post-sales engineers to purchase the license.
Procedure
- Choose .
- Select sites from the local address book. Alternatively, search for sites from the LDAP address book, save the found sites in the local address book, and select the sites from the local address book. Then click Start Conference.
- Set the conference parameters. Refer to Initiating a Conference from the Predefined Conference Page.
- Click Hold Conference.
The conference starts.