Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring Video
When monitoring video, you can adjust local video effects, select video sources, set camera presets, and control cameras.
After the Monitor video function is enabled, you can monitor, take, and save pictures of the video and presentation of local and remote sites on the endpoint web interface.
To enable this function, on the remote controlled UI, choose . Then, select the Monitor video parameter.![]()
This function involves personal privacy. Ensure
that its use complies with local laws and regulations.
- Adjusting Local Video Effects
You can set the video parameters for your site, such as the screen brightness, contrast, and saturation, to your own preferences. - Selecting Video Sources
You can specify input sources for the video and presentation at your site, as well as video output sources. - Setting a Camera Preset
Camera presets are camera positions you set and save ahead of time. A camera preset stores the pan, tilt, and zoom settings of the camera. You can easily control the camera by switching between camera presets. You can configure remote camera presets during conferences. - Controlling a Camera
You can perform pan, tilt, and zoom (PTZ) control over a local or remote camera.