No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E-M2 V800R010C10SPC500 Configuration Guide - Interface and Data Link 01

This is NE40E-M2 V800R010C10SPC500 Configuration Guide - Interface and Data Link
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining Interfaces

Maintaining Interfaces

The reset commands help locate faults on interfaces.

Clearing Interface Statistics

Before collecting traffic statistics within a specified period of time on an interface, you must clear existing statistics on the interface.

Context

Statistics cannot be restored after being cleared. Exercise caution when running the following commands.

Procedure

  • To clear the traffic statistics on an interface, run the reset counters interface command in the user view.

Monitoring Interface Information

Monitoring interface statistics helps you analyze network information based on traffic statistics and rates.

Procedure

  • Run the monitor interface-statistics interface-type interface-number &<1-5> [ interval interval-value | times { times-value | infinity } ] * command in any view to check traffic statistics on a specified interface.
  • Run the monitor interface-statistics batch [ interface-type [ interface-number-begin [ to interface-number-end ] ] ] [ interval interval-value | times { times-value | infinity } ] * [ main ] command in any view to check traffic statistics on interfaces in a batch.
  • Run the monitor interface-information interface interface-type interface-number [ interval interval-value | times { times-value | infinity } ] * command in any view to check detailed information, including the running status and traffic statistics, on a specified interface.
  • Run the monitor counters bit [ rate ] interface interface-type interface-number [ interval interval-value | times { times-value | infinity } ] * command in any view to monitor traffic statistics on an interface. The traffic statistics include the number of unicast, multicast, and broadcast packets sent or received by the interface and the packet transmission rate.
Download
Updated: 2019-01-02

Document ID: EDOC1100058380

Views: 1821

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next