No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E-M2 V800R010C10SPC500 Configuration Guide - System Management 01

This is NE40E-M2 V800R010C10SPC500 Configuration Guide - System Management
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for NETCONF--M2E

Licensing Requirements and Limitations for NETCONF--M2E

Licensing Requirements

This feature is a basic feature and is not under license control.

Restrictions and Guidelines

Restrictions

Guidelines

Impact

When a device interworks with an NMS client that notifies only the base capability in compliance with the standard, the YANG mode is used for the interworking. If the NMS client notifies the exchange capability, Huawei-proprietary schema mode is used for the interworking.

Use the correct NMS client for interworking.

The interworking between the NMS and device may fail.

The size of a delivered RPC packet cannot be greater than 30 MB.

Deliver RPC packets, each of which is less than 30 MB.

RPC packets greater than 30 MB are not processed.

An end-to-end NETCONF non-query operation must be completed within 10 minutes. Otherwise, a timeout occurs.

None

If the non-query operation takes more than 10 minutes, a timeout occurs.

In the case of NETCONF query, if no service response is received within 10 minutes, a timeout occurs. If a response is received before the timeout occurs, the timer is reset.

None

None

  • The exchange capability set is advertised to identify whether a schema packet or a YANG packet will be processed later.
  • The exchange capability set is advertised to identify the mode of processing high-specification data.
  • The sync capability set is advertised to determine whether the packet returned by edit-configuration carries a flow ID.

None

None

When a user performs a schema operation, performing schema patch operations causes the schema operation to fail.

Do not perform schema operations when schema patch operations are being performed.

None

The database may be locked during schema patch installation. Therefore, full synchronization or database locking cannot be performed in this case.

Do not perform full synchronization or database locking during schema patch installation.

None

Download
Updated: 2019-01-02

Document ID: EDOC1100058392

Views: 18032

Downloads: 31

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next