No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E-M2 V800R010C10SPC500 Configuration Guide - System Management 01

This is NE40E-M2 V800R010C10SPC500 Configuration Guide - System Management
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Example for Updating a GTL File

Example for Updating a GTL File

This section provides configuration procedures for updating a GTL on a device. This allows the device to use GTL-controlled resource and function items.

Networking Requirements

If the GTL file on a device expires or more features are required on the device, you can replace or update the GTL file. The GTL is not activated in the initial state, and therefore does not take effect in the system.

As shown in Figure 22-7, the GTL file of Device A cannot meet customer's requirements and needs to be updated. Huawei has provided an updated GTL file for the customer to load onto Device A.

Figure 22-7 Networking diagram for updating a GTL file

Precautions

  • The GTL files on the AMB and SMB must be the same.

Configuration Roadmap

The configuration roadmap is as follows:

  1. Upload the GTL file to the storage medium on the AMB.
  2. Activate the GTL file.
  3. Verify the configuration.

Data Preparation

To complete the configuration, you need the following data:

  • Name of the GTL file, which is license.dat in this example
  • GTL file storage path on the AMB, which is 0/17#home:/ in this example

Procedure

  1. Upload the GTL file matching the system software.

    # Configure Device A as an FTP server.
    <HUAWEI> system-view
    [~HUAWEI] sysname DeviceA
    [*HUAWEI] commit
    [~DeviceA] ftp server enable
    Info:  Enabling the FTP server configuration  succeeded. 
    [*DeviceA] aaa
    [*DeviceA-aaa] local-user user1 password cipher Hello-huawei123
    [*DeviceA-aaa] local-user user1 service-type ftp
    [*DeviceA-aaa] local-user user1 ftp-directory cfcard:/
    [*DeviceA-aaa] commit
    [~DeviceA-aaa] quit
    [~DeviceA] quit
    After the configuration is complete, run the display local-user command to view user information.
    <DeviceA> display local-user
    --------------------------------------------------------------------------------
    ----------------                                                                
    Username                         State   Type   Access-limit   Online   AdminLevel   UsergroupId                                                                
    ------------------------------------------------------------------------------------------------                                                                
    user1                            Active  F                No        0   -            -                                                                          
    ------------------------------------------------------------------------------------------------                                                                
    Total 1, 1 printed   
    # On the PC, configure the binary transmission mode and set c:\temp as the working directory.
    NOTE:

    The following part uses the Windows XP system as an example.

    1. Save the uploaded system software to the specified directory (for example, c:\temp).
    2. Choose Start > Run. Enter cmd, and then press Enter
    3. Enter FTP 10.1.1.1. In the user field, enter the user name; in the password field, enter the password.
    The following configurations are displayed:
    ftp 10.1.1.1
    Connect to 10.1.1.1.
    220 FTP server ready.
    User <10.1.1.1:<none>>:user1
    331 Please specify the password.
    Password:
    230 User logged in.
    
    Specify a directory for the FTP client to store the uploaded files and specify the file transfer mode.
    ftp> binary
    200 Type set to I.
    ftp> lcd c:\temp
    Local directory now c:\temp.
    # Upload the GTL file matching the current system software from the PC to Device A.
    ftp> put license.dat
    200 Port command okay.
    226 Transfer complete.

    # Copy the GTL file to the storage medium on the SMB.

    <DeviceA> copy 0/17#home:/license.dat 0/18#home:/
    Copy 0/17#home:/license.dat to 0/18#home:/?[Y/N]:Y
    Info:Copied file 0/17#home:/license.dat to 0/18#home:/...Done

  2. Activate the GTL file.

    <DeviceA> license active license.dat
    Info: The License is being activated. Please wait for a moment.
    Info: Succeeded in activating the License file on the master board.

  3. Verify the configuration.

    Run the display license command. You can view the GTL file being used by the device.

    <DeviceA> display license
    Info: Active License on master board: home:/all.dat
    
     License state     : Demo
     Revoke ticket     : No ticket
     
     R&D of Huawei Technologies Co., Ltd.
    
     Product name      : NetEngine5000E
     Product version   : V800R010C10
     License Serial No : LIC2012020600F510
     Creator           : Huawei Technologies Co., Ltd.
     Created Time      : 2012-02-06 17:05:38
     Feature name      : UserFeature1
     Authorize type    : demo
     Expired date      : 2012-05-03
     Trial days        : 60
    
     Item name          Item type      Value      Description
     ------------------------------------------------------------- 
     LCR5LSVS01         Function       1          LCR5LSVS01        
     LCR5NETSTM04       Resource       128        LCR5NETSTM04      
     LCR5VPN01          Resource       128        LCR5VPN01         
     LCR5ROUTE01        Resource       128        LCR5ROUTE01       
     LCR5TE01           Resource       128        LCR5TE01          
     LCR5CLUSTR01       Resource       128        LCR5CLUSTR01      
    
     Master board license state: Demo. The Demo days remains 52 days. 

Configuration Files

None

Download
Updated: 2019-01-02

Document ID: EDOC1100058392

Views: 18120

Downloads: 31

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next