No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E-M2 V800R010C10SPC500 Configuration Guide - System Management 01

This is NE40E-M2 V800R010C10SPC500 Configuration Guide - System Management
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SNMP Configuration

SNMP Configuration

The Simple Network Management Protocol (SNMP) is a network management standard widely used on UDP networks. It uses a central computer (a network management station) that runs network management software to manage network elements. Three SNMP versions are available: SNMPv1, SNMPv2c, and SNMPv3. Select one or more versions if needed.

Context

NOTE:
  • After an NMS accesses a device from the admin-VS through SNMP, the NMS can access non-admin-VSs by carrying the VSID in the community (SNMPv1/v2c) or context (SNMPv3) field of packets. If the NMS accesses a non-admin-VS from the admin-VS, the NMS is authenticated only in the non-admin-VS. For example, if community is set to public123 for the admin-VS, the NMS can use public123@vs=1 (1 indicates the VSID) to access the VSI.
  • An NMS cannot access a non-admin-VS from another non-admin-VS.
Download
Updated: 2019-01-02

Document ID: EDOC1100058392

Views: 17958

Downloads: 31

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next