No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E-M2 V800R010C10SPC500 Configuration Guide - System Management 01

This is NE40E-M2 V800R010C10SPC500 Configuration Guide - System Management
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring the NTP Operating Status

Monitoring the NTP Operating Status

You can monitor the NTP operating status.

Context

You can run the following commands in any view to monitor the NTP operating status in routing maintenance.

Procedure

  • Run the display ntp-service sessions command to view the details about the configured and the dynamic NTP sessions.
  • Run the display ntp-service status command to view the status of the NTP service.
  • Run the display ntp-service trace command to trace the path of reference clock source from the local device.
  • Run the display clock command to view the system time.
Download
Updated: 2019-01-02

Document ID: EDOC1100058392

Views: 17801

Downloads: 28

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next