No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E-M2 V800R010C10SPC500 Configuration Guide - System Management 01

This is NE40E-M2 V800R010C10SPC500 Configuration Guide - System Management
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining LLDP

Maintaining LLDP

Maintaining LLDP includes clearing information about LLDP statistics and monitoring LLDP status.

Clearing LLDP Statistics

This section describes how to use reset commands to clear Link Layer Discovery Protocol (LLDP) statistics.

Context

Statistics cannot be restored after being cleared. Therefore, exercise caution when you run the following commands.

Procedure

  • Run the reset lldp statistics [ interface interface-type interface-number ] command in the user view to clear statistics about LLDP packets.

Monitoring LLDP Status

This section describes how to use display commands to monitor LLDP status.

Context

In routine maintenance, you can run the following commands in any view to check the LLDP status.

Procedure

  • Run the display lldp statistics [ interface interface-type interface-number ] command to check statistics about LLDP packets transmitted by all interfaces or a specified interface.
Download
Updated: 2019-01-02

Document ID: EDOC1100058392

Views: 15154

Downloads: 24

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next