No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E-M2 V800R010C10SPC500 Configuration Guide - System Management 01

This is NE40E-M2 V800R010C10SPC500 Configuration Guide - System Management
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of Clock Synchronization

Overview of Clock Synchronization

Definition

Synchronization is classified into the following types:

  • Clock synchronization, also called frequency synchronization

    Clock synchronization maintains a strict relationship between signal frequencies or between signal phases. Signals are transmitted at the same average rate within the valid time. In this manner, all devices on a network run at the same rate.

    On a digital communication network, a sender places a pulse signal in a specific timeslot for transmission. A receiver needs to extract this pulse signal from this specific timeslot to ensure that the sender and receiver communicate properly. The clocks on the sender and receiver must also be synchronized to ensure smooth communication. Clock synchronization enables the clocks on the sender and receiver to be synchronized.

  • Time synchronization, also called phase synchronization

    Generally, the word "time" indicates either a moment or a time interval. A moment is a transient in a period, whereas a time interval is the interval between two transients. Time synchronization adjusts the internal clocks and moments of devices based on a received time. The working principle of time synchronization is similar to that of clock synchronization. When a time is adjusted, both the frequency and phase of a clock are adjusted. The phase of this clock is represented by a moment in the form of year, month, day, hour, minute, second, millisecond, microsecond, and nanosecond. Time synchronization enables devices to receive discontinuous time reference information and to adjust their times to synchronize times. Clock synchronization enables devices to trace a clock source to synchronize frequencies.

Figure 7-1 Comparison between the time synchronization and clock synchronization

The figure shows the difference between time synchronization and clock synchronization. In time synchronization, watches A and B always keep the same time. In clock synchronization, watches A and B keep different times, but the time difference between the two watches is a constant value, for example, 6 hours.

Purpose

Clock synchronization aims to limit the clock frequency or phase difference between network elements (NEs) on a digital communication network within an allowable range. Information is coded into digital pulse signals using pulse code modulation (PCM) and transmitted on a digital communication network. If the clock frequencies of two digital switching devices are different, or digital bit streams are corrupted due to interference during transmission, phase drift or jitter occurs. Consequently, the buffer of the digital switching system experiences data loss or duplication, resulting in incorrect transmission of bit streams. If the clock frequency or phase difference exceeds an allowable range, bit errors or jitter may occur. As a result, network transmission performance deteriorates.

Download
Updated: 2019-01-02

Document ID: EDOC1100058392

Views: 20460

Downloads: 33

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next