No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E-M2 V800R010C10SPC500 Configuration Guide - System Management 01

This is NE40E-M2 V800R010C10SPC500 Configuration Guide - System Management
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Example for Performing Software Upgrade that Takes Effect at the Next Startup

Example for Performing Software Upgrade that Takes Effect at the Next Startup

This section provides configuration procedures for performing software upgrade that takes effect at the next startup. This will help you complete the configuration task quickly and accurately.

Networking Requirements

Software upgrade that takes effect at the next startup can be performed on a device if the current system software cannot provide additional features or larger specifications required by customers, and the device must work uninterruptedly for a long time.

As shown in Figure 22-4, the system software of Device A cannot meet customer's requirements and needs to be upgraded. Huawei has provided related upgrade files for the customer to perform software upgrade on Device A.

Figure 22-4 Networking diagram for performing software upgrade that takes effect at the next startup

Precautions

  • The key data in the storage medium on the device must be backed up to the PC.
  • The CPU usage and the remaining space in the storage medium must meet the upgrade requirement.

Configuration Roadmap

The configuration roadmap is as follows:

  1. Upload the new system software.
  2. Specify the system software to be used at the next startup.
  3. Restart Device A.
  4. Verify the configuration.

Data Preparation

To complete the configuration, you need the following data:

  • Mode of uploading the system software, FTP server, user name, and user password, which are FTP, Device A, user1, and Hello-huawei123 respectively in this example
  • System software source version, which is NE40EV800R010C10B000.cc in this example
  • System software version to be specified, which is NE40EV800R010C10B003.cc in this example
  • Remaining space of the storage medium for saving the new system software (if the remaining space is insufficient, release some space as required)

Procedure

  1. Upload the new system software.

    # Configure Device A as an FTP server.
    <HUAWEI> system-view
    [~HUAWEI] sysname DeviceA
    [*HUAWEI] commit
    [~DeviceA] ftp server enable
    Info:  Enabling the FTP server configuration  succeeded. 
    [*DeviceA] aaa
    [*DeviceA-aaa] local-user user1 password cipher Hello-huawei123
    [*DeviceA-aaa] local-user user1 service-type ftp
    [*DeviceA-aaa] local-user user1 ftp-directory cfcard:/
    [*DeviceA-aaa] commit
    [~DeviceA-aaa] quit
    [~DeviceA] quit
    After the configuration is complete, run the display local-user command to view user information.
    <DeviceA> display local-user
    --------------------------------------------------------------------------------
    ----------------                                                                
    Username                         State   Type   Access-limit   Online   AdminLevel   UsergroupId                                                                
    ------------------------------------------------------------------------------------------------                                                                
    user1                            Active  F                No        0   -            -                                                                          
    ------------------------------------------------------------------------------------------------                                                                
    Total 1, 1 printed   
    # On the PC, configure the binary transmission mode and set c:\temp as the working directory.
    NOTE:

    The following part uses the Windows XP system as an example.

    1. Save the uploaded system software to the specified directory (for example, c:\temp).
    2. Choose Start > Run. Enter cmd, and then press Enter
    3. Enter FTP 10.1.1.1. In the user field, enter the user name; in the password field, enter the password.
    The following configurations are displayed:
    ftp 10.1.1.1
    Connect to 10.1.1.1.
    220 FTP server ready.
    User <10.1.1.1:<none>>:user1
    331 Please specify the password.
    Password:
    230 User logged in.
    
    Specify a directory for the FTP client to store the uploaded files and specify the file transfer mode.
    ftp> binary
    200 Type set to I.
    ftp> lcd c:\temp
    Local directory now c:\temp.
    # Upload the new system software (*.cc) from the PC to the Device.
    ftp> put NE40EV800R010C10B003.cc
    200 Port command okay.
    226 Transfer complete.
    # Copy the uploaded system software (*.cc) to the storage medium of the SMB on Device A.
    <DeviceA> copy cfcard:/NE40EV800R010C10B003.cc slave#cfcard:/
    Copy cfcard:/NE40EV800R010C10B003.cc to slave#cfcard:/?[Y/N]:Y
    Info:Copied file cfcard:/NE40EV800R010C10003.cc to slave#cfcard:/...Done

  2. Specify the system software to be loaded at the next startup.

    # Specify system software to be loaded at the next startup.

    <DeviceA> startup system-software NE40EV800R010C10B003.cc
    Succeeded in setting the software for booting system.
    <DeviceA> startup system-software NE40EV800R010C10B003.cc slave-board
    Succeeded in setting the software for booting system.

    # Check the system software to be loaded at the next startup and make sure that it is the specified version.

    <DeviceA> display startup
    MainBoard                               :
      Configured startup system software    : NE40EV800R010C10B000.cc
      Startup system software               : NE40EV800R010C10B000.cc
      Next startup system software          : NE40EV800R010C10B003.cc
      Startup saved-configuration file      :
      Next startup saved-configuration file : cfcard:/aa.cfg
    SlaveBoard                              :
      Configured startup system software    : NE40EV800R010C10B000.cc
      Startup system software               : NE40EV800R010C10B000.cc
      Next startup system software          : NE40EV800R010C10B003.cc
      Startup saved-configuration file      :
      Next startup saved-configuration file : cfcard:/aa.cfg

  3. Restart Device A.

    # Restart Device A.

    <DeviceA> reboot
    reboot fast 
    IPU 6:
    Next startup system software: cfcard:/NE40EV800R010C10.cc
    Next startup saved-configuration file: cfcard:/vrpcfg.zip
    Next startup paf file: default
    Next startup patch package: NULL
    
    The Other IPU is the same with IPU 6
    
    System will reboot! Continue? [Y/N]:y

  4. Verify the configuration.

    After Device A is restarted, run the display version command. If the version of the current system software in the command output is a new one, it means that the upgrade succeeds.

    The new system software is NE40EV800R010C10B003.cc.

    <HUAWEI> system-view
    [~HUAWEI] sysname DeviceA
    [*HUAWEI] commit
    [~DeviceA] display version
    Huawei Versatile Routing Platform Software
    VRP (R) software, Version 8.180 (NE40E V800R010C10)
    Copyright (C) 2012-2016 Huawei Technologies Co., Ltd.
    HUAWEI NE40E uptime is 0 day, 3 hours, 37 minutes

Configuration Files

None

Download
Updated: 2019-01-02

Document ID: EDOC1100058392

Views: 18495

Downloads: 31

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next