No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E-M2 V800R010C10SPC500 Configuration Guide - System Management 01

This is NE40E-M2 V800R010C10SPC500 Configuration Guide - System Management
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of Fault Management

Overview of Fault Management

FM enhances network reliability.

Definition

The fault management function is one of five functions (performance management, configuration management, security management, fault management, and charging management) that make up a telecommunications management network. The primary purposes of this function are to monitor the operating anomalies and problems of devices and networks in real time and to monitor, report, and store data on faults and device running conditions. Fault management also provides alarms, helping users isolate or rectify faults so that affected services can be restored.

Purpose

With the popularity of networks, complexity of application environments, and expansion of network scales, our goal must be to make network management more intelligent and effective. Improving and optimizing fault management will help us meet this goal. Improved fault management can achieve the following:

  • Reduction in the volume of alarms generated

    Alarm masking, alarm correlation analysis and suppression, and alarm continuity analysis functions are supported to provide users with the most direct and valid fault alarm information and to lighten the load on the fault management system. Such support for efficient fault location and diagnosis enhances the ability of the network element (NE) management system to manage same-network NEs and cross-network NEs.

  • Guaranteed alarm reporting

    Use of the active alarm table and internal reliability guarantee mechanism allows alarms to be displayed immediately so that faults can be rapidly and correctly located and analyzed.

Download
Updated: 2019-01-02

Document ID: EDOC1100058392

Views: 19920

Downloads: 33

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next