No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E-M2 V800R010C10SPC500 Configuration Guide - System Management 01

This is NE40E-M2 V800R010C10SPC500 Configuration Guide - System Management
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining NETCONF

Maintaining NETCONF

Maintaining NETCONF helps learn device running information.

Enabling NETCONF Operation Log Query

To query NETCONF operation logs, you need to enable NETCONF operation log query.


  1. Run system-view

    The system view is displayed.

  2. Run snetconf server enable

    NETCONF is enabled.

  3. Run netconf

    The NETCONF user interface view is displayed.

  4. Run rpc-message log protocol-operation get

    NETCONF operation log query is enabled.

  5. Run commit

    The configuration is committed.

Updated: 2019-01-02

Document ID: EDOC1100058392

Views: 20253

Downloads: 33

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next