No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E-M2 V800R010C10SPC500 Configuration Guide - System Management 01

This is NE40E-M2 V800R010C10SPC500 Configuration Guide - System Management
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the System Clock

Configuring the System Clock

You need to correctly set the system clock to ensure synchronization with other devices.

Usage Scenario

NTP provides the provision for configuring the system datetime, timezone and daylight saving time information.

In the application environment where absolute time is strictly required, the current date and clock of the Router must be set.

Pre-configuration Tasks

None

Procedure

  1. Run clock datetime time date

    The current time is set.

  2. (Optional) Run system-view

    The system view is displayed.

  3. Run clock timezone time-zone-name { add | minus } offset

    The local time zone is set.

  4. Run clock daylight-saving-time time-zone-name one-year start-time start-date end-time end-date offset

    Or, clock daylight-saving-time time-zone-name repeating start-time { { first | second | third | fourth | last } weekday month | start-date } end-time { { first | second | third | fourth | last } weekday month | end-date } offset [ start-year [ end-year ] ]

    The daylight saving time is set.

Checking the Configurations

Run the display clock command to display the system time.

<HUAWEI> display clock
2018-01-02 17:02:34+08:00                                                       
Tuesday                                                                         
Time Zone(BJ) : UTC+08:00                                                       
Daylight saving time    :                                                       
         Name           :  BJ                                                   
         Repeat mode    :  one-year                                             
         Start year     :  2018                                                 
         End year       :  2018                                                 
         Start time     :  02-01 11:22:00                                       
         End time       :  08-11 22:11:00                                       
         Saving time    :  01:04:00 
Download
Updated: 2019-01-02

Document ID: EDOC1100058392

Views: 14992

Downloads: 24

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next