No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E-M2 V800R010C10SPC500 Configuration Guide - WAN Access 01

This is NE40E-M2 V800R010C10SPC500 Configuration Guide - WAN Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Basic FR Function Configuration

Verifying the Basic FR Function Configuration

After configuring basic FR functions, verify the configuration.

Prerequisites

Basic FR functions have been configured.

Procedure

  • Run the display fr interface [ interface-type interface-number ] command to check FR protocol status and interface information on a specific interface.
  • Run the display fr pvc-info [ interface interface-type interface-number ] [ dlci dlci-number ] command to check VC configurations and statistics.
  • Run the display fr lmi-info [ interface interface-type interface-number ] command to check statistics about received and sent LMI packets.
  • Run the display fr statistics [ interface interface-type interface-number ] command to check statistics about received and sent data.

Example

Run the display fr interface [ interface-type interface-number ] command to view FR protocol status and interface information on a specific interface.

<HUAWEI> display fr interface
Pos0/1/0, DTE, physical down, protocol down
Pos0/2/0, DTE, physical up, protocol up

Run the display fr pvc-info [ interface interface-type interface-number ] [ dlci dlci-number ] command to view VC configurations and statistics.

<HUAWEI> display fr pvc-info
PVC statistics for interface Pos0/1/0 (DTE, physical UP)
 DLCI = 111, USAGE = LOCAL, Pos0/1/0.1
 create time = 2013/11/05 11:19:17, status = ACTIVE
 in BECN = 0, in FECN = 0
 in packets = 0, in bytes = 0
 out packets = 0, out bytes = 0

Run the display fr lmi-info [ interface interface-type interface-number ] command to view statistics about received and sent LMI packets.

<HUAWEI> display fr lmi-info
Frame relay LMI statistics for interface Pos0/1/0 (DTE, Q933)
  T391DTE = 10 (hold timer 10)
  N391DTE = 5, N392DTE = 3, N393DTE = 4
  out status enquiry = 0, in status = 0
  status timeout = 0, discarded messages = 0
Frame relay LMI statistics for interface Pos0/1/1 (DCE, Q933)
  T392DCE = 15, N392DCE = 3, N393DCE = 4
  in status enquiry = 250, out status = 250
  status enquiry timeout = 0, discarded messages = 15

Run the display fr statistics [ interface interface-type interface-number ] command to view statistics about received and sent data.

<HUAWEI> display fr statistics
Frame relay packet statistics for interface Pos0/1/0 (DTE)
  
    SDH alarm:
        section layer:  LOS
        line    layer:  none
        path    layer:  none
    SDH error:
        section layer:  B1 0
        line    layer:  B2 0  REI 0
        path    layer:  B3 0  REI 0
Statistics last cleared:never
    Last 300 seconds input rate 61 bits/sec, 0 packets/sec 
    Last 300 seconds output rate 61 bits/sec, 0 packets/sec 
    Input: 332 packets, 12764 bytes
    Input error: 0 shortpacket, 0 longpacket, 0 CRC, 0 lostpacket
                 0 overrunpackets, 0 invalidpackets
    Output: 332 packets, 12800 bytes
    Output error: 0 lostpackets
                  0 overrunpackets, 0 underrunpackets
                  0 shortpackets, 0 longpackets
Download
Updated: 2019-01-02

Document ID: EDOC1100058399

Views: 13743

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next