No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E-M2 V800R010C10SPC500 Configuration Guide - WAN Access 01

This is NE40E-M2 V800R010C10SPC500 Configuration Guide - WAN Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
PPP Configuration

PPP Configuration

Functioning at the data link layer of the Open Systems Interconnection (OSI) and the link layer of the TCP/IP protocol suite, the Point-to-Point Protocol (PPP) is a link layer protocol that is used to transmit network layer packets over point-to-point (P2P) links. PPP is developed based on the Serial Line Internet Protocol (SLIP). PPP is widely used because it provides user authentication, supports synchronous and asynchronous communication, and is easy to extend.

NOTE:

M2E/M2F/M2H supports PPP Configuration.

Download
Updated: 2019-01-02

Document ID: EDOC1100058399

Views: 13540

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next