No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E-M2 V800R010C10SPC500 Configuration Guide - WAN Access 01

This is NE40E-M2 V800R010C10SPC500 Configuration Guide - WAN Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Basic FR Functions

Configuring Basic FR Functions

FR uses VCs and works at the physical and data link layers of the OSI model. FR is characterized by high throughput and short delay and is applicable in case of burst service traffic.

Context

The Internet and IP technology has gained an overwhelming competitive edge in the application field with their simplicity and flexibility. FR supports multiplexing. Therefore, when IP packets enter an FR-capable network, FR devices can forward the packets to the destination. Currently, IPoFR has become a primary alternative in deploying an IP broadband network.

Figure 6-1 shows locations where FR can be deployed. FR deployment includes the following parts:

  • FR access (on the user side)
  • FR switching (on the network side)
NOTE:

Currently, only FR access is supported.

Figure 6-1 Networking for IPoFR

FR access enables IP packets from DTEs to enter an FR-capable network and to be forwarded by DCEs.

Pre-configuration Tasks

Before configuring basic FR functions, configure physical attributes for FR interfaces.

Configuration Procedures

Perform one or more of the following configurations as required.

Figure 6-2 Flowchart for configuring basic FR functions
Download
Updated: 2019-01-02

Document ID: EDOC1100058399

Views: 13643

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next