No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E-M2 V800R010C10SPC500 Configuration Guide - WAN Access 01

This is NE40E-M2 V800R010C10SPC500 Configuration Guide - WAN Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining HDLC and IP-Trunk

Maintaining HDLC and IP-Trunk

This section describes how to maintain HDLC and IP-Trunk, including deleting statistics about HDLC or IP-Trunk interfaces.

Deleting Statistics About HDLC or IP-Trunk Interfaces

You can run the reset command to delete interface statistics before re-collecting traffic statistics on a specified interface.


Interface statistics cannot be restored after you delete it. Therefore, exercise caution when running the reset command.

To clear interface statistics on the NMS or displayed using the display interface command, you can run the reset command in the user view.


For information on how to view the interface statistics on the NMS, see the NMS manual.


  • Run the reset counters interface [ interface-type [ interface-number ] ] command to delete interface statistics.
Updated: 2019-01-02

Document ID: EDOC1100058399

Views: 13201

Downloads: 37

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next