No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E-M2 V800R010C10SPC500 Configuration Guide - WAN Access 01

This is NE40E-M2 V800R010C10SPC500 Configuration Guide - WAN Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing the Information About Transmission Alarms

Clearing the Information About Transmission Alarms

Before re-collecting information about transmission alarms on an interface, clear the existing information about transmission alarms on the interface.

Context

After information about transmission alarms has been cleared, all statistics on alarms will be reset. Exercise caution when running the reset transmission-alarm statistics command.

Procedure

  1. To clear the information about transmission alarms, run the reset transmission-alarm statistics command in the interface view.
Download
Updated: 2019-01-02

Document ID: EDOC1100058399

Views: 15355

Downloads: 39

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next