No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E-M2 V800R010C10SPC500 Configuration Guide - WAN Access 01

This is NE40E-M2 V800R010C10SPC500 Configuration Guide - WAN Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Serial Interface

Configuring a Serial Interface

Before you configure a serial interface, familiarize yourself with the usage scenario, complete the pre-configuration tasks, and obtain the configuration procedure for the configuration.

Usage Scenario

If you want a serial interface to carry upper-layer services, configure the link-layer attributes of the serial interface and ensure that the status of the link-layer protocol for the serial interface is Up.

Pre-configuration Tasks

Before configuring link-layer attributes, create a serial interface.

Configuration Procedure

Perform one or more of the following configurations as required.

Updated: 2019-01-02

Document ID: EDOC1100058399

Views: 13830

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next