No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E-M2 V800R010C10SPC500 Feature Description - LAN Access and MAN Access 01

This is NE40E-M2 V800R010C10SPC500 Feature Description - LAN Access and MAN Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IP Forwarding on a Termination Sub-interface

IP Forwarding on a Termination Sub-interface

On the network shown in Figure 7-9 and Figure 7-10, when the NPE at the edge of the MPLS/IP core network acts as a gateway for users, termination sub-interfaces must support IP forwarding.

IP forwarding can be configured on a sub-interface for Dot1q VLAN tag termination or sub-interface for QinQ VLAN tag termination, based on whether the user packets received by the NPE carry one or two VLAN tags.

  • If the user packets contain one tag, the sub-interface that has IP forwarding configured is a sub-interface for Dot1q VLAN tag termination.

  • If the user packets contain double tags, the sub-interface that has IP forwarding configured is a sub-interface for QinQ VLAN tag termination.

IP Forwarding on a Sub-interface for Dot1q VLAN Tag Termination

Figure 7-9 IP forwarding on a sub-interface for Dot1q VLAN tag termination

The sub-interface for Dot1q VLAN tag termination first identifies the outer VLAN tag and then generates an ARP entry containing the IP address, MAC address, and outer VLAN tag.

  • For the upstream traffic, the termination sub-interface strips the Ethernet frame header (including MAC address) and the outer VLAN tag, and searches the routing table to perform Layer 3 forwarding based on the destination IP address.

  • For the downstream traffic, the termination sub-interface encapsulates IP packets with the Ethernet frame header (including MAC address) and outer VLAN tag according to ARP entries and then sends IP packets to the target user.

IP Forwarding on a Sub-interface for QinQ VLAN Tag Termination

Figure 7-10 IP forwarding on a sub-interface for QinQ VLAN tag termination

The sub-interface for QinQ VLAN tag termination first identifies double VLAN tags and then generates an ARP entry containing the IP address, MAC address, and double VLAN tags.

  • For the upstream traffic, the termination sub-interface strips the Ethernet frame header (including MAC address) and double VLAN tags, and searches the routing table to perform Layer 3 forwarding based on the destination IP address.

  • For the downstream traffic, the termination sub-interface encapsulates IP packets with the Ethernet frame header (including MAC address) and double VLAN tags according to ARP entries and then sends IP packets to the target user.

Download
Updated: 2019-01-02

Document ID: EDOC1100058405

Views: 16628

Downloads: 18

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next