No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E-M2 V800R010C10SPC500 Feature Description - LAN Access and MAN Access 01

This is NE40E-M2 V800R010C10SPC500 Feature Description - LAN Access and MAN Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Multicast Service on a Termination Sub-interface

Multicast Service on a Termination Sub-interface

With wide applications of multicast services on the Internet, when double-tagged multicast packets are sent from the user side to a sub-interface for QinQ VLAN tag termination sub-interface, the sub-interface needs to support the Internet Group Management Protocol (IGMP). In this manner, the UPE can maintain outbound interface information of the multicast packets based on the created multicast forwarding table, and the hosts can communicate with the multicast source.

Figure 7-24 Multicast service on a termination sub-interface

On the network shown in Figure 7-24, when the DSLAM forwards double-tagged multicast packets to the UPE, the UPE processes the packets as follows based on double-tag contents:

  1. When the double-tagged packets carrying an outer S-VLAN tag and an inner C-VLAN tag are transmitted to the UPE to access the Virtual Switching Instances (VSIs), the UPE terminates the double tags and binds the packets to the multicast VSIs through Pseudo Wires (PWs). Then, the PE-AGG terminates PWs and adds multicast VLAN tags to the packets. Finally, the packets are transmitted to the multicast source. For example, IPTV packets with S-VLAN 3 and C-VLANs ranging from 1 to 1000 are terminated on the UPE and then access a PW. The PE-AGG terminates the PW and adds multicast VLAN 8 to the packets. IGMP snooping sets up forwarding entries based on the interface number, S-VLAN tag, and C-VLAN tag and supports multicast packets with different C-VLAN tags. Each PW then forwards the multicast packets based on their S-VLAN IDs and C-VLAN IDs.

  2. When the double-tagged packets carrying an outer C-VLAN tag and an inner S-VLAN tag are transmitted to the UPE, the UPE enabled with VLAN swapping swaps the outer C-VLAN tag and inner S-VLAN tag. If multicast packets access Layer 2 VLANs, the packets are processed in mode 1; if multicast packets access VSIs, the packets are processed in mode 2.

NOTE:

Generally, VLANs are divided into the following types:

  • C-VLAN: customer VLAN

  • S-VLAN: service VLAN

The UPE processes packets in the following modes:
  • Single-tagged packets: The sub-interface for Dot1q VLAN tag termination needs to have IGMP and IGMP snooping configured.

  • Double-tagged packets: The sub-interface for QinQ VLAN tag termination needs to have IGMP and IGMP snooping configured.

Download
Updated: 2019-01-02

Document ID: EDOC1100058405

Views: 18301

Downloads: 26

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next