No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E-M2 V800R010C10SPC500 Feature Description - LAN Access and MAN Access 01

This is NE40E-M2 V800R010C10SPC500 Feature Description - LAN Access and MAN Access

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
VLAN Damping

VLAN Damping

In case that a VLAN Down event occurs when all the interfaces added to the VLAN go Down, the VLAN will report the Down event to the corresponding VLANIF interface, causing a change in the VLANIF interface status.

To avoid this, enable VLAN damping on the VLANIF interface.

After VLAN damping is enabled, among all the interfaces that are added to the VLAN, if the last Up interface in the VLAN becomes Down, the VLAN damping-enabled device will report the VLAN status to the VLANIF interface after the set delay time expires. If some interfaces in the VLAN become Up before the set delay time expires, the VLANIF interface status will stay Up. VLAN damping delays reporting a Down event to a VLANIF interface and suppresses unnecessary route flapping.


If a user runs a command to enable a VLAN to go Down, VLAN damping does not need to be configured.

Updated: 2019-01-02

Document ID: EDOC1100058405

Views: 21179

Downloads: 29

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next