No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E-M2 V800R010C10SPC500 Feature Description - LAN Access and MAN Access 01

This is NE40E-M2 V800R010C10SPC500 Feature Description - LAN Access and MAN Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
VPWS Access Through a QinQ Stacking Sub-interface

VPWS Access Through a QinQ Stacking Sub-interface

The Virtual Private Wire Service (VPWS) is a point-to-point L2VPN technology. A VLANIF interface does not support VPWS, and therefore you have to access a Virtual Private Network (VPN) through a main interface. Such a configuration is not flexible because multiple users cannot access through the same physical interface. To ensure the access of multiple users through the same physical interface, you can use the QinQ stacking function on different sub-interfaces. This requires that CE-VLANs on PE1 and PE2 be the same.

On the network shown in Figure 7-25, a QinQ stacking sub-interface on PE1 adds an outer VLAN tag of the ISP network to its received user packets that carry a VLAN tag ranging from 1 to 200 on sub-interfaces. Then, PE1 sends these packets to the VPWS network.

Figure 7-25 VPWS access through a QinQ stacking sub-interface

Updated: 2019-01-02

Document ID: EDOC1100058405

Views: 17814

Downloads: 23

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next