No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E-M2 V800R010C10SPC500 Feature Description - LAN Access and MAN Access 01

This is NE40E-M2 V800R010C10SPC500 Feature Description - LAN Access and MAN Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
VXLAN Gateway Deployment

VXLAN Gateway Deployment

To implement Layer 3 interworking, a Layer 3 gateway must be deployed on a VXLAN. VXLAN gateways can be deployed in centralized or distributed mode.

Centralized VXLAN Gateway Mode

In this mode, Layer 3 gateways are configured on one device. On the network shown in Figure 15-8, traffic across network segments is forwarded through Layer 3 gateways to implement centralized traffic management.

Figure 15-8 Centralized VXLAN gateway networking
Centralized VXLAN gateway deployment has its advantages and disadvantages.
  • Advantage: Inter-segment traffic can be centrally managed, and gateway deployment and management is easy.
  • Disadvantages:
    • Forwarding paths are not optimal. Inter-segment Layer 3 traffic of data centers connected to the same Layer 2 gateway must be transmitted to the centralized Layer 3 gateway for forwarding.
    • The ARP entry specification is a bottleneck. ARP entries must be generated for tenants on the Layer 3 gateway. However, only a limited number of ARP entries are allowed by the Layer 3 gateway, impeding data center network expansion.

Distributed VXLAN Gateway Mode

Deploying distributed VXLAN gateways addresses problems that occur in centralized VXLAN gateway networking. Distributed VXLAN gateways use the spine-leaf network. In this networking, leaf nodes, which can function as Layer 3 VXLAN gateways, are used as VTEPs to establish VXLAN tunnels. Spine nodes are unaware of the VXLAN tunnels and only forward VXLAN packets between different leaf nodes. On the network shown in Figure 15-9, Server 1 and Server 2 on different network segments both connect to Leaf 1. When Server 1 and Server 2 communicate, traffic is forwarded only through Leaf 1, not through any spine node.

Figure 15-9 Distributed VXLAN gateway networking

A spine node supports high-speed IP forwarding capabilities.

A leaf node can:
  • Function as a Layer 2 VXLAN gateway to connect to physical servers or VMs and allow tenants to access VXLANs.
  • Function as a Layer 3 VXLAN gateway to perform VXLAN encapsulation and decapsulation to allow inter-segment VXLAN communication and access to external networks.
Distributed VXLAN gateway networking has the following characteristics:
  • Flexible deployment. A leaf node can function as both Layer 2 and Layer 3 VXLAN gateways.
  • Improved network expansion capabilities. A leaf node only needs to learn the ARP entries of servers attached to it. A centralized Layer 3 gateway in the same scenario, however, has to learn the ARP entries of all servers on the network. Therefore, the ARP entry specification is no longer a bottleneck on a distributed VXLAN gateway.
Updated: 2019-01-02

Document ID: EDOC1100058405

Views: 16875

Downloads: 20

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next