No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E-M2 V800R010C10SPC500 Feature Description - LAN Access and MAN Access 01

This is NE40E-M2 V800R010C10SPC500 Feature Description - LAN Access and MAN Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application Scenarios for GVRP

Application Scenarios for GVRP

This section describes a usage scenario of GVRP.

GVRP enables network devices to dynamically maintain and update VLAN information. You can complete VLAN configuration on a switched network by configuring only a few devices, reducing time spent analyzing the network topology and managing configurations. In Figure 4-9, GVRP is enabled on each device. Devices are interconnected through trunk interfaces, and each trunk interface allows packets of all VLANs to pass. VLANs 100 to 1000 are manually created on Device A and Device C. To allow interfaces on Device B to automatically join these VLANs, configure GVRP.

Figure 4-9 GVRP application
Download
Updated: 2019-01-02

Document ID: EDOC1100058405

Views: 16633

Downloads: 18

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next