No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E-M2 V800R010C10SPC500 Feature Description - LAN Access and MAN Access 01

This is NE40E-M2 V800R010C10SPC500 Feature Description - LAN Access and MAN Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
VPWS Access Through a Termination Sub-interface

VPWS Access Through a Termination Sub-interface

Virtual Pseudo Wire Service (VPWS) access through a termination sub-interface for QinQ VLAN tag termination means that VPWS functions are configured on the sub-interface for QinQ VLAN tag termination. By configuring the range of double VLAN tags on the sub-interface for QinQ VLAN tag termination on a PE, users within the VLAN tag range are allowed to access VPWS. A local device can transparently transmit user packets with double VLAN tags to a remote device for authentication. The remote device is usually a Broadband Remote Access Server (BRAS).

Figure 7-21 shows a typical networking for VPWS access through a sub-interface for QinQ VLAN tag termination.

Figure 7-21 VPWS access through a sub-interface for QinQ VLAN tag termination

Download
Updated: 2019-01-02

Document ID: EDOC1100058405

Views: 17782

Downloads: 23

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next