No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E-M2 V800R010C10SPC500 Feature Description - LAN Access and MAN Access 01

This is NE40E-M2 V800R010C10SPC500 Feature Description - LAN Access and MAN Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application of MSTP Multi-process

Application of MSTP Multi-process

As shown in Figure 10-18, the UPEs are connected to each other through Layer 2 links and enabled with Multiple Spanning Tree Protocol (MSTP). The rings connected to the UPEs must be independent of each other. The devices on the rings connected to the UPEs support only Rapid Spanning Tree Protocol (RSTP), not MSTP.

After MSTP multi-process is enabled, each MSTP process corresponds to a ring connected to the UPE. The spanning tree protocol on each ring calculates a tree independently.

Figure 10-18 Application with MSTP multi-process

Updated: 2019-01-02

Document ID: EDOC1100058405

Views: 16592

Downloads: 18

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next