No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E-M2 V800R010C10SPC500 Feature Description - LAN Access and MAN Access 01

This is NE40E-M2 V800R010C10SPC500 Feature Description - LAN Access and MAN Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application of EVC Bearing VPLS Services

Application of EVC Bearing VPLS Services

Service Overview

As enterprises widen their global reach and establish more branches in different regions, applications such as instant messaging and teleconferencing are becoming more common. This imposes high requirements for end-to-end (E2E) Datacom technologies. A network capable of providing point to multipoint (P2MP) and multipoint to multipoint (MP2MP) services is paramount to Datacom function implementation. To ensure the security of enterprise data, secure, reliable, and transparent data channels must be provided for multipoint transmission.

Generally, enterprises lease virtual switching instances (VSIs) on a carrier network to carry services between branches.

Networking Description

Figure 8-13 Networking of enterprise service distribution

In Figure 8-13, Branch 1 and Branch 3 belong to one department (the Procurement department, for example), and Branch 2 and Branch 4 belong to another department (the R&D department, for example). Services must be isolated between these departments, but each department can plan their VLANs independently (for example, different service development teams belong to different VLANs). The enterprise plans to dynamically adjust the departments but does not want to lease multiple VSIs on the carrier network because of the associated costs.

Feature Deployment

In the traditional service model supported by the NE40E shown in Figure 8-13, common sub-interfaces (VLAN type), sub-interfaces for dot1q VLAN tag termination, or sub-interfaces for QinQ VLAN tag termination are created on the user-side interfaces of the PEs. These sub-interfaces are bound to different VSIs on the carrier network to isolate services in different departments. If the enterprise sets up another department, the enterprise must lease another VSI from the carrier to isolate the departments, increasing costs.

To allow the enterprise to dynamically adjust its departments and reduce costs, the EVC model can be deployed on the PEs. In the EVC model, multiple BDs are connected to the same VSI, and the BDs are isolated from each other.

Figure 8-14 Diagram of EVC bearing L2VPN services
In Figure 8-14, the EVC model is deployed as follows:
  1. VPLS connections are created on the PEs to ensure communication on the Layer 2 network.
  2. BDs are created on the PEs to isolate enterprise services.
  3. EVC Layer 2 sub-interfaces are created on the PEs on the user side, are configured with QinQ traffic encapsulation type and pop double traffic behavior, and transmit Enterprise services to the carrier network.

  4. A BDIF interface is created in each BD, and the BDs are bound to the same VSI to transmit enterprise services over Pseudo Wires (PWs).
Figure 8-14 shows the VSI channel mode in which BDs are connected to the VPLS network. The VSI functions as the network-side channel, and BDs function as service instances on the access layer. A VSI can carry service traffic in multiple BDs.
  • When a packet travels from a BD to a PW, the PE adds the BD ID to the packet as the outer tag (P-Tag).
  • When a packet travels from a PW to a BD, the PE searches for the VSI instance based on the VC label and the BD based on the P-Tag.

The NE40E also supports the exclusive VSI service mode. This mode is similar to a traditional service mode in which sub-interfaces are bound to different VSIs to connect to the VPLS network. Figure 8-15 shows a diagram of the exclusive VSI service mode.

Figure 8-15 Diagram of the exclusive VSI service mode

In the exclusive VSI service mode, each VSI is connected to only one BD, and the BD occupies the VSI resource exclusively.

Download
Updated: 2019-01-02

Document ID: EDOC1100058405

Views: 16360

Downloads: 18

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next