No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E-M2 V800R010C10SPC500 Feature Description - User Access 01

This is NE40E-M2 V800R010C10SPC500 Feature Description - User Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


Option ID


Function as


Option Description

Vendor-specific Information option, used for the LDRA to encapsulate the customized DSL line attribute information into Relay-Forward messages in broadband access scenarios. Currently, only sub-code 81 (129 in decimal notation) to sub-code 8E (142 in decimal notation) can be used as Option 17's sub-options carried in packets to be sent to the RADIUS server. The format strictly complies with standard protocols. Sub-codes cannot be independently carried in packets to be sent to the RADIUS server.

Currently, the sub-codes and corresponding attribute names supported are as follows:

129(0x81) Actual-Data-Rate-Upstream
130(0x82) Actual-Data-Rate-Downstream
131(0x83) Minimum-Data-Rate-Upstream
132(0x84) Minimum-Data-Rate-Downstream
133(0x85) Attainable-Data-Rate-Upstream
134(0x86) Attainable-Data-Rate-Downstream
135(0x87) Maximum-Data-Rate-Upstream
136(0x88) Maximum-Data-Rate-Downstream
137(0x89) Minimum-Data-Rate-Upstream-Low-Power
138(0x8A) Minimum-Data-Rate-Downstream-Low-Power
139(0x8B) Maximum-Interleaving-Delay-Upstream
140(0x8C) Actual-Interleaving-Delay-Upstream
141(0x8D) Maximum-Interleaving-Delay-Downstream
142(0x8E) Actual-Interleaving-Delay-Downstream

Option Format

Carried in Packets to Be Sent to the RADIUS Server

This option can be carried in a packet to be sent to the RADIUS server in the authentication and accounting stages.

Delivered in Packets from the RADIUS Server

Not supported

RADIUS Attributes Carrying Options

Not supported

Related Configuration Commands


Updated: 2019-01-02

Document ID: EDOC1100058415

Views: 14809

Downloads: 9

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next